🦥 Dji Phantom Camera Not Working

Hi everyone, this worked for me: 1) Connect your drone to your PC first, then launch DJI Assistant 2. 2) DJI Assistant recognized the drone, click on the icon. 3) Unplug drone. 4) Power on remote controller and connect to drone. 5) Connect remote controller to PC. 6) Launch DJI Assistant 2.

PHANTOM 3 Professional or Advanced remote controller firmware is v1.3.20 or above, you must use the DJI GO app to update the firmware. To check your current firmware version, launch the DJI GO app and tap through Camera View > System Status Bar > Overall Status. The firmware update process takes around 10 minutes. We Well it isn't doing that you say. The cam just stays looking forward. Like i said it will barely start rotating downwards. like just a little bit. and then it just falls back in forward position at the moment you see it start moving. this goes on until i have the controls on the app sat maximum down. then it is stil looking forward. the same happends if i try to make it look a little upwards. United States. Offline. 1#. I have a Phantom 2 that is not displaying the camera feed on my iPhone but IS recording to the sim card. I went through the 'Binding' process several times to no avail. When I go into the iPhone app, it tries to connect but doesn't show the camera . The blue connection lights are on in the upper right corner. Open the Go app, with your controller connected and on. On the splash screen with the photo of the drone, hold down the little hamburger menu in the top left corner for at least 10 seconds. When you release it a firmware menu should pop up for the controller. Select the version number in the middle of the screen, scroll down the oldest version . 89 285 181 340 14 258 329 268 172

dji phantom camera not working